Going from HASPHL2007 .dng file to x64 bit os
+31
nam1972
montyrob941
Axiom88
ovis25
rodneyveloso
enilder
kuarak
shpeenut
ianlcc
tonyM
sasio22
sanson01
rgallego
drbuda
Natsisan
bobpj
tom24786
drleonunes
livesubscribe
hechizo21
caris
quadmel
clawhammer
kjms
priviett
hasp4_75
there
nodongle
mikeymatteo
hasp
rustycage
35 posters
Page 2 of 7
Page 2 of 7 • 1, 2, 3, 4, 5, 6, 7
Re: Going from HASPHL2007 .dng file to x64 bit os
if you see Virtual USB Multikey in System Device with no yellow warning, it's ok for multikey. the emulation is ready
if you don't have "usbkey" in usb composite device:
- you don't insert the reg file
- you don't install the driver of the key
if you don't have "usbkey" in usb composite device:
- you don't insert the reg file
- you don't install the driver of the key
hasp4_75- Posts : 7
Points : 9
Reputation : 0
Join date : 2013-01-28
Re: Going from HASPHL2007 .dng file to x64 bit os
to: hask4_75 , you are the same person how user hasp, who has me create the *.reg file? If yes, I really happy for helping me. Thank you very much.
1) I added the *.reg to my registry, but I have not control it with regedit. Windows show me the sucesfull message box about it and I belive him. I would like test it, but it is not possible. Win8 64bit is on my desktop at home and I will be out of home for few weeks. Because it´s look like it is not problem with emulator but *.reg or drivers I will test it on my notebook with Win7 32bit tomorow.
2) I have been use HASPUserSetup.exe from 2010 drivers 64bit ( Sentinel Hasp Run time setup )
I will test the newest drivers. But may be I give you the bad password.
I have only this numbers from HASPHL2007, and I really don´t know which of these two Strings is the passwords.
Licence Dongles:6FB20803
HASP/HL 56A530B2
1) I added the *.reg to my registry, but I have not control it with regedit. Windows show me the sucesfull message box about it and I belive him. I would like test it, but it is not possible. Win8 64bit is on my desktop at home and I will be out of home for few weeks. Because it´s look like it is not problem with emulator but *.reg or drivers I will test it on my notebook with Win7 32bit tomorow.
2) I have been use HASPUserSetup.exe from 2010 drivers 64bit ( Sentinel Hasp Run time setup )
I will test the newest drivers. But may be I give you the bad password.
I have only this numbers from HASPHL2007, and I really don´t know which of these two Strings is the passwords.
Licence Dongles:6FB20803
HASP/HL 56A530B2
Last edited by there on Tue Jan 29, 2013 10:16 am; edited 2 times in total (Reason for editing : correction)
there- Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27
Re: Going from HASPHL2007 .dng file to x64 bit os
dongle id = 56A530B2
dongle serial no = 6FB20803
dongle serial no = 6FB20803
hasp- Posts : 454
Points : 634
Reputation : 172
Join date : 2011-12-16
Re: Going from HASPHL2007 .dng file to x64 bit os
I have been tested on my Win7 32bit. It doesn´t work.
1) I have installed multikey DriverVer=12/31/2009, 0.18.2.3
- I see them in system devices - as Virtual USB Multikey
2) Then I install the Alladin driver
HASP Device Driver version 5.22
3) I have been add the *.reg to registry. I start regedit and I have see there.
In Device manager - Universal Serial USB controler - I don´t see the hardlock.
I thing the problem is in wrong password. I give you bad password. Where can I fing the correct password?
1) I have installed multikey DriverVer=12/31/2009, 0.18.2.3
- I see them in system devices - as Virtual USB Multikey
2) Then I install the Alladin driver
HASP Device Driver version 5.22
3) I have been add the *.reg to registry. I start regedit and I have see there.
In Device manager - Universal Serial USB controler - I don´t see the hardlock.
I thing the problem is in wrong password. I give you bad password. Where can I fing the correct password?
Last edited by there on Wed Jan 30, 2013 9:54 am; edited 1 time in total (Reason for editing : correction)
there- Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27
Re: Going from HASPHL2007 .dng file to x64 bit os
I was looking to the page : dongleduplicate.nsys.by/passwfind.htm
and I see the way to find password. So I must give you the correct pass.
Somebody where is the problem?
and I see the way to find password. So I must give you the correct pass.
Somebody where is the problem?
there- Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27
Re: Going from HASPHL2007 .dng file to x64 bit os
post your installer setup file here
hasp- Posts : 454
Points : 634
Reputation : 172
Join date : 2011-12-16
Re: Going from HASPHL2007 .dng file to x64 bit os
hasp wrote:post your installer setup file here
If you mean file which install the drivers (hdd32.exe). Here it is.
http(://)depositfiles.com/files/7ckt8c2ft
Last edited by there on Thu Jan 31, 2013 10:42 am; edited 1 time in total (Reason for editing : corection)
there- Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27
Re: Going from HASPHL2007 .dng file to x64 bit os
not driver file, what i say program installer setup file..
Last edited by hasp on Mon Feb 04, 2013 10:44 am; edited 1 time in total
hasp- Posts : 454
Points : 634
Reputation : 172
Join date : 2011-12-16
Re: Going from HASPHL2007 .dng file to x64 bit os
hasp wrote:not driver file, what i saw program installer setup file..
I am sorry, it is not possible. The developers of this programs are my friends and I will not share the program to the net.
there- Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27
Re: Going from HASPHL2007 .dng file to x64 bit os
than try your self
hasp- Posts : 454
Points : 634
Reputation : 172
Join date : 2011-12-16
Re: Going from HASPHL2007 .dng file to x64 bit os
Hi,
I have somewhat the same problem as "there."
I used a software on XP32bits with HASPEmulPE-XP_2_33_a002W.EXE and a Reg file.
Everything was ok.
I created a dump in XP32bits.
I created a reg file compatible with multikey with DUMP2REG
I installed multikey32 18.0.3 and this REG under XP32 and the software works.
I installed multikey64 18.0.3 and this REG under Seven64 and it does not work.
What I did under Seven64:
1 - I cut UAC
2 - With DESEO13B, I go into test mode.
3 - I have "Test Mode Windows 7 number 7601" in the lower right
4 - I run the REG file
5 - I installed 18.0.3 64-bit Multikey
6 - I install the Hasp driver
6 - I have the device "USB Virtual Multikey" in the peripheral system, which is ok
7 - I have devices "Aladdin USB Key" and "Aladdin HASP Key" in the Universal Serial Bus controllers, which are ok.
The software does not see the key.
Any idea? Any help?
Thanks a lot.
I have somewhat the same problem as "there."
I used a software on XP32bits with HASPEmulPE-XP_2_33_a002W.EXE and a Reg file.
Everything was ok.
I created a dump in XP32bits.
I created a reg file compatible with multikey with DUMP2REG
I installed multikey32 18.0.3 and this REG under XP32 and the software works.
I installed multikey64 18.0.3 and this REG under Seven64 and it does not work.
What I did under Seven64:
1 - I cut UAC
2 - With DESEO13B, I go into test mode.
3 - I have "Test Mode Windows 7 number 7601" in the lower right
4 - I run the REG file
5 - I installed 18.0.3 64-bit Multikey
6 - I install the Hasp driver
6 - I have the device "USB Virtual Multikey" in the peripheral system, which is ok
7 - I have devices "Aladdin USB Key" and "Aladdin HASP Key" in the Universal Serial Bus controllers, which are ok.
The software does not see the key.
Any idea? Any help?
Thanks a lot.
hasp4_75- Posts : 7
Points : 9
Reputation : 0
Join date : 2013-01-28
Re: Going from HASPHL2007 .dng file to x64 bit os
here is NO magic people's. put here your MK reg/dump files
BfoX- Posts : 1218
Points : 1662
Reputation : 307
Join date : 2012-04-18
Location : Earth
Re: Going from HASPHL2007 .dng file to x64 bit os
hasp wrote:than try your self
I will, for me it is not a problem. I thing the problem is in *.reg file becase I can´t see the Alladin USB dongle in device manager. It´s possible the say me how have you create it?
2 hasp4_75 : maybe, it´s look like it must be two different *.reg files ( one for 32bit, second fo 64bit)
there- Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27
Re: Going from HASPHL2007 .dng file to x64 bit os
Hi,
Here all the files:
hoop depositfiles.com_files_uc89wqwfn
Thanks.
Rudy.
Here all the files:
hoop depositfiles.com_files_uc89wqwfn
Thanks.
Rudy.
hasp4_75- Posts : 7
Points : 9
Reputation : 0
Join date : 2013-01-28
Re: Going from HASPHL2007 .dng file to x64 bit os
XP32 with multikey - NOK under Seven64.reg this reg perfect for 32 & 64 bit...
soft run always F8 sign drive mode...
soft run always F8 sign drive mode...
hasp- Posts : 454
Points : 634
Reputation : 172
Join date : 2011-12-16
Re: Going from HASPHL2007 .dng file to x64 bit os
There is no difference if I select
disable the control driver signing by F8 or not
Why am I forced to do that?
I'm always in Test Mode.
Where can I find THE good Seven64 driver for this key?
disable the control driver signing by F8 or not
Why am I forced to do that?
I'm always in Test Mode.
Where can I find THE good Seven64 driver for this key?
hasp4_75- Posts : 7
Points : 9
Reputation : 0
Join date : 2013-01-28
Re: Going from HASPHL2007 .dng file to x64 bit os
Hello.
I have a software called CPC Caption Maker, i have been using this software with the Hasp\Hardlock Emulator 2007 for almost 4 years, i have an .dng file, not the dump, because i only have this file, i have no access to the physical dongle anymore, but now i need to use this in win 7 and 8 x64.
Can you please help me?
I have multikey already installing and running, it appears on the device manager, so far no problem.
Im attaching the .dng.
I supose that the pass is the one that appears on the dumper window in the Hasp\Hardlock Emulator 2007
7EF5:1F0C
The serial is: 469422BC
I have a software called CPC Caption Maker, i have been using this software with the Hasp\Hardlock Emulator 2007 for almost 4 years, i have an .dng file, not the dump, because i only have this file, i have no access to the physical dongle anymore, but now i need to use this in win 7 and 8 x64.
Can you please help me?
I have multikey already installing and running, it appears on the device manager, so far no problem.
Im attaching the .dng.
I supose that the pass is the one that appears on the dumper window in the Hasp\Hardlock Emulator 2007
7EF5:1F0C
The serial is: 469422BC
Thank you so much.w w w .mediafire.com/?plrtegq2gwzqd2
priviett- Posts : 3
Points : 3
Reputation : 0
Join date : 2013-02-10
Re: Going from HASPHL2007 .dng file to x64 bit os
Priviett
check the link is wrong
check the link is wrong
kjms- Posts : 194
Points : 201
Reputation : -4
Join date : 2010-09-12
Re: Going from HASPHL2007 .dng file to x64 bit os
Im sorry
it was to late last night and i was very tired.
w w w .mediafire.com/?plrtegq2gwzqd25
it was to late last night and i was very tired.
w w w .mediafire.com/?plrtegq2gwzqd25
priviett- Posts : 3
Points : 3
Reputation : 0
Join date : 2013-02-10
Re: Going from HASPHL2007 .dng file to x64 bit os
use multikey 18.0.3 for 64bit
- Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Multikey\Dumps\7EF51F0C]
"Copyright"="hasp"
"Name"="For priviett"
"DongleType"=Dword:00000001
"Created"="11/02/2013 23:50:53"
"SN"=dword:469422BC
"Type"=dword:0000000A
"Memory"=dword:00000001
"SecTable"=hex:6E,2C,FE,BC,42,00,D2,90
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,4A,1F,01,0B,01,0D,01,10,15,12,00
"Data"=hex:\
25,00,03,05,0A,00,00,00,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF
hasp- Posts : 454
Points : 634
Reputation : 172
Join date : 2011-12-16
Re: Going from HASPHL2007 .dng file to x64 bit os
2 priviett :
Does it work?
Does it work?
there- Posts : 14
Points : 14
Reputation : 0
Join date : 2013-01-27
Re: Going from HASPHL2007 .dng file to x64 bit os
Hello! I have the same issue on x64.
My HASP successfully was emulated on x32 with HASPHL2007, and DNG created from Haspedge (HASP tab).
I don't understand - is the key SRM (i can connect by 1947 web GUI) or HL?
[You must be registered and logged in to see this image.]
I have an DNG but can't share it due to site restrictions for 7 days
Password : 5E1B:276B
Is it possible to run it on x64?
My HASP successfully was emulated on x32 with HASPHL2007, and DNG created from Haspedge (HASP tab).
I don't understand - is the key SRM (i can connect by 1947 web GUI) or HL?
[You must be registered and logged in to see this image.]
I have an DNG but can't share it due to site restrictions for 7 days
Password : 5E1B:276B
Is it possible to run it on x64?
clawhammer- Posts : 15
Points : 21
Reputation : 0
Join date : 2013-02-23
Re: Going from HASPHL2007 .dng file to x64 bit os
you can upload it at any share and post here your link
BfoX- Posts : 1218
Points : 1662
Reputation : 307
Join date : 2012-04-18
Location : Earth
Re: Going from HASPHL2007 .dng file to x64 bit os
There is an option on this site - newborns cant post links for 7 days.
But i try: ow.ly / hZXen
But i try: ow.ly / hZXen
clawhammer- Posts : 15
Points : 21
Reputation : 0
Join date : 2013-02-23
Re: Going from HASPHL2007 .dng file to x64 bit os
your hasp password is wrong. you don't have pass than upload your hasphl2007 XXXX.dmp file
hasp- Posts : 454
Points : 634
Reputation : 172
Join date : 2011-12-16
Page 2 of 7 • 1, 2, 3, 4, 5, 6, 7
Similar topics
» Help update from HASPHL2007 .dng file to x64 bit os
» HASPHL2007 32bit DNG file, time expired
» Can you go from dmp to dng
» c2v file what is inside of this file?
» i need reg file
» HASPHL2007 32bit DNG file, time expired
» Can you go from dmp to dng
» c2v file what is inside of this file?
» i need reg file
Page 2 of 7
Permissions in this forum:
You cannot reply to topics in this forum