HASP HL Pro (Purple)

Hi there!

I have been trying to emulate an HASP HL 3.25 dongle however not succeded until now. So far I was not even capable of getting the hasp passwords....can anyone help me?

With UVCView I've got the following information:

---===>Device Information<===---
English product name: "HASP HL 3.25"

ConnectionStatus:
Current Config Value: 0x01 -> Device Bus Speed: Low
Device Address: 0x01
Open Pipes: 0
*!*ERROR: No open pipes!

===>Device Descriptor<===
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0200
bDeviceClass: 0xFF -> This is a Vendor Specific Device
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x08 = ( Bytes
idVendor: 0x0529idProduct: 0x0001
bcdDevice: 0x0325
iManufacturer: 0x01
English (United States) "AKS"
iProduct: 0x02
English (United States) "HASP HL 3.25"
iSerialNumber: 0x00
bNumConfigurations: 0x01

===>Configuration Descriptor<===
bLength: 0x09
bDescriptorType: 0x02
wTotalLength: 0x0014
*!*ERROR: Invalid total configuration size 0x14, should be 0x12
bNumInterfaces: 0x01
bConfigurationValue: 0x01
iConfiguration: 0x00
bmAttributes: 0x80 -> Bus Powered
MaxPower: 0x19 = 50 mA

===>Interface Descriptor<===
bLength: 0x09
bDescriptorType: 0x04
bInterfaceNumber: 0x00
bAlternateSetting: 0x00
bNumEndpoints: 0x00
bInterfaceClass: 0xFF -> Vendor Specific Device
bInterfaceSubClass: 0x00
*!*CAUTION: This appears to be an invalid bInterfaceSubClass
bInterfaceProtocol: 0x00
iInterface: 0x00
*!*ERROR: 0xFF is the prerelease USB Video Class ID


Thanks.

hasp srm may be?

Well...I don't know. How can I check that?

However now I was able to get the passwords - 0x10A3 and 0x1EC4 - using HASPHL2007 (with HASPHL2010 didn't worked).
According to what I have read, I tried to dump the dongle and for that I have used H4dmpbs but even the dump says succeded I got only 10A31EC4.dmp file. Shoudn't I get another one?

Now I was trying to convert the dump to .reg however I was not able to find the uni to reg converter.

I really appreciate all the help! Thanks!

show it

Pass1 0x10A3
Pass2 0x1EC4

www31.zippyshare.com/v/79624431/file.html

save as reg use multikey 18.2.4 for 32bit, for 64bit use 18.0.3mkey.

Code:

REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\10A31EC4]
"Copyright"="hasp"
"SN"=dword:02099B42
"Type"=dword:0000000A
"Name"="For cmgpereira"
"Memory"=dword:00000001
"DongleType"=dword:00000001
"Created"="03/11/2012 07:01:19"
"SecTable"=hex:0D,D4,58,D0,E1,F0,F0,F0
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,54,24,00,00,00,00,00,00,00,00,C9
"Data"=hex:\
54,41,43,4B,45,20,20,20,20,20,20,20,20,20,20,20,\
64,61,20,43,6F,73,74,61,20,54,65,69,78,65,69,72,\
61,20,20,20,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF

It seems to be working with a strange and small issue. Sometimes when I start the application windows restarts with an error (black screen with one line error message) and I am not able to read the message...however after a new boot works normally. This is very rare to happens (for what I have tested so far)...

I searched for multikey 18.2.4 but I was only able to find 18.2.3...could that be the cause? This had never happened me before using the dongle.

Anyway I really have to thank you for the great help! Thanks!

Well...after a while I found what was the problem.

I was trying to use this emulator on a virtual machine. Apparently on VirtualBox it doesn't work 100% (sometimes yes but ocasionally it crashes with blue screen). After testing on VMWare no problem at all. According to what I've read may be related with some drivers emulation on the virtual machine emulator.

Hope this information may be useful for others...

Finally, hasp can I ask you how did you generate the .reg file with the information I sent you? THanks again!

Thanks all for your valuable advice.

@vaishali_k86
dump with this dumber (http://lostdongle.com/bin/HaspHLDumper1.01.rar) post the bin file link here after....

Thanks all for your valuable advice.

wait a week to follow the admin rules...

Ok hasp. In the mean time any tips so that I can try to work around the problem myself.

if your dongle hasp hl need to extracted QA tables from your .exe , .dll file & hasp log file.

Thanks all for your valuable advice.

Thanks all for your valuable advice.

vaishali_k86 Dump and log is not enough for hasp hl wirh .protect envelope.
You need to extract pair table from .protect section with hand our tools

Hi,

I am trying to emulate another dongle but I don't know how to create the reg for multikey use...

I already have the dump file but now I am stucked...I will upload the dump (Pass1: 2B2B Pass2: 6F4D)

[You must be registered and logged in to see this link.]


Thanks.

save as reg use multikey 18.2.4 for 32bit, for 64bit use 18.0.3mkey.

Code:

REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Multikey\Dumps\2B2B6F4D]
"Copyright"="hasp" 
"Name"="For cmgpereira"
"DongleType"=Dword:00000001     
"Created"="12/02/2013 20:53:56"
"SN"=dword:34BC2E44
"Type"=dword:0000000A
"Memory"=dword:00000001
"SecTable"=hex:07,74,0B,78,87,F4,8B,F8
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,54,24,00,00,00,00,00,00,00,00,C9
"Data"=hex:\
57,49,4E,44,4D,41,4E,20,31,31,31,31,30,30,38,32,\
DD,07,42,B4,3C,3C,90,78,66,6E,3A,CA,C6,E4,C0,C6,\
66,2A,E6,69,15,C9,5F,8A,52,9E,9E,6A,7E,7A,52,20,\
72,E2,AC,72,1C,98,34,1A,63,4C,5E,9C,CA,24,A8,B8,\
D8,58,7C,F8,1E,12,1E,1A,30,20,80,B0,7E,26,0E,14,\
AA,90,A8,C4,28,D2,80,00,F6,48,90,90,9E,18,7E,F6,\
46,6A,CE,B8,CA,74,B8,FE,C8,FA,04,28,52,42,4C,F0

I have u dump purple hasp

[You must be registered and logged in to see this link.]

2885:50B5

Thanks for help

save as reg use multikey 18.2.4 for 32bit, for 64bit use 18.0.3mkey.

288550B5:

I'm use this key , but is not working...

[You must be registered and logged in to see this link.]

And i have dump file ... i need dump file to dng

dump - [You must be registered and logged in to see this link.]

---------------------------------------------------------

Ok, key working for me....dongle is working !

Thanks

Dear Sirs
I am not able to log from Hasp HL PRO (purple key) to get Pass. Tried with Toro and Sataron with no luck.
Any suggestion is welcome.
Thaks and Regards
Teo

hasp srm

Dear Bfox
Used SRM-DUMPER and generated 3 files.
EA_59135.dmp
ro_mem.bin
rw_mem.bin
How to get file.reg for Multikey Emulator if possible?
What suggest me to do next?
Thanks a lot and Regards
Teo