How to Dump Sentinel Dual Hardware Key?

I have SDK/SHDK dongle and need to back it up.
I tried all of the dump software and failed to dump the dongle.
Does anybody have the experience how to dump and emulate it?
This is the description of my USB Dongle Information:

---===>Device Information<===---
English product name: "Sentinel Dual Hardware Key"

ConnectionStatus:
Current Config Value: 0x01 -> Device Bus Speed: Full
Device Address: 0x03
Open Pipes: 2

===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x01 -> Direction: OUT - EndpointID: 1
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0040 = 0x40 bytes
bInterval: 0x00

===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x81 -> Direction: IN - EndpointID: 1
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0040 = 0x40 bytes
bInterval: 0x00

===>Device Descriptor<===
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0200
bDeviceClass: 0xFF -> This is a Vendor Specific Device
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x08 = ( Bytes
idVendor: 0x04B9idProduct: 0x8004
bcdDevice: 0x0200
iManufacturer: 0x02
English (United States) "SafeNet Inc."
iProduct: 0x01
English (United States) "Sentinel Dual Hardware Key"
iSerialNumber: 0x00
bNumConfigurations: 0x01

===>Configuration Descriptor<===
bLength: 0x09
bDescriptorType: 0x02
wTotalLength: 0x0020 -> Validated
bNumInterfaces: 0x01
bConfigurationValue: 0x01
iConfiguration: 0x00
bmAttributes: 0x80 -> Bus Powered
MaxPower: 0x1E = 60 mA

===>Interface Descriptor<===
bLength: 0x09
bDescriptorType: 0x04
bInterfaceNumber: 0x00
bAlternateSetting: 0x00
bNumEndpoints: 0x02
bInterfaceClass: 0xFF -> Vendor Specific Device
bInterfaceSubClass: 0x00
*!*CAUTION: This appears to be an invalid bInterfaceSubClass
bInterfaceProtocol: 0x00
iInterface: 0x00
*!*ERROR: 0xFF is the prerelease USB Video Class ID

===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x01 -> Direction: OUT - EndpointID: 1
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0040 = 0x40 bytes
bInterval: 0x00

===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x81 -> Direction: IN - EndpointID: 1
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0040 = 0x40 bytes
bInterval: 0x00

dump with this tool and upload your dump file here

hi hasp

I downloaded the file as your reference (safedump232). but, how to find the Dev ID and The WP???
If I am using PVA 3.3 i get the file name spro_RNBO_SPN_DRIVER_11e8_0.dmp (http://www.2shared.com/file/KaxarwgK/PVA.html) and i used it DeviceID: 0x11e8, but the error RNBOsproFindFirstUnit failed with 3...

are you sure the safedump is valid for sentinel dual hardware key?

Thanks,

algos both inactive, capture with toro sentinel monitor upload logger here...safe dump error's install sentinel driver 7.5 and above, dump command as like "safedump 11E8 WP "

Code:

Number of Query Cells = 2
0x08 0x0A
DevID  = 0x11E8
Serial = 0x3119
WP    = 0x0000
Cell 0x08 : standard, sig=235
****************************************************************
Cell 0x08 not solved. May be inactive, secure tunnel, or AES cell algo
Cell 0x0A : standard, sig=0
Cell 0x0A has incorrect data . May be inactive, secure tunnel, or AES cell algo
Processing time  32.760 seconds

Code:

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\000011E8]
"DongleType"=dword:00000003
"Copyright"="hasp"
"Created"="Mon Mar 26 09:26:23.674"
"Name"="11E8 Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
    01,01,03,03,03,01,03,01,\
    03,03,03,03,01,01,01,01,\
    01,01,01,01,01,01,01,01,\
    01,01,01,01,01,01,01,01,\
    01,01,01,01,01,01,01,01,\
    01,01,01,01,01,01,01,01,\
    01,01,01,01,00,00,00,00,\
    00,00,00,00,00,00,00,00
"sntMemory"=hex:\
    19,31,E8,11,00,00,00,00,00,00,00,00,00,00,00,00,\
    00,00,00,00,00,00,00,00,C1,A8,03,02,55,4E,49,53,\
    4F,46,54,00,05,00,00,00,C0,00,A3,02,32,30,2F,30,\
    39,2F,32,30,31,31,00,00,02,00,0B,00,00,00,00,00,\
    00,00,00,00,00,00,00,00,00,00,00,02,D0,2B,46,00,\
    00,00,00,11,03,02,01,00,FD,EC,38,54,1F,D9,78,9C,\
    C6,CF,8B,A3,66,27,90,B8,00,00,00,00,00,00,00,00,\
    00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00


hasp,

Toro sentinel monitor is only for Hasp4/HaspHL/Hardlock. I tries it to my Sentinel Dual Hardware Key, The result is "Nothing"...

I tried to dump using ShkDumper from nodongle and the result is Shk-e40b36e4-00001891.bin ( [You must be registered and logged in to see this link.] ). is it valid?

Thanks,


any else idea?

toro sentinel monitor here, capture the log

hi hasp,

finally i can see the dongle log for SDHK using Toro Sentinel.
This is the link [You must be registered and logged in to see this link.]

so what i have to do with this log?

so hasp,

there is no update? or your also give up?
mmmm///.....

you can reupload your shk dump?

bfox are you help us i will upload this?

@hasp: i'm ask topic starter luke12faulin for this dump

@bfox: what we discussed here that we still have the problem to generate the corrected dump by using dumper tools over the space... our last discussion with "hasp" that I submitted the dongle log using TORO dongle monitor.. I am still waiting what we can do with it... its not like Sentinel Ultra/Pro, but this is Sentinel dual key dongle..

I resubmitted the file what the last...

[You must be registered and logged in to see this link.]

Your help will be appreciated....

Hi
i see log
KeyType=7 -> ULP USB

is UltraPro not SHK

Landogar, PM me your email - i send to you deciphered dump file.

Landogar wrote:Hi
i see log
KeyType=7 -> ULP USB

is UltraPro not SHK

Landogar..

This is my USB dongle information


---===>Device Information<===---
English product name: "Sentinel Dual Hardware Key"

ConnectionStatus:
Current Config Value: 0x01 -> Device Bus Speed: Full
Device Address: 0x03
Open Pipes: 2

===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x01 -> Direction: OUT - EndpointID: 1
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0040 = 0x40 bytes
bInterval: 0x00

===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x81 -> Direction: IN - EndpointID: 1
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0040 = 0x40 bytes
bInterval: 0x00

===>Device Descriptor<===
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0200
bDeviceClass: 0xFF -> This is a Vendor Specific Device
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x08 = ( Bytes
idVendor: 0x04B9idProduct: 0x8004
bcdDevice: 0x0200
iManufacturer: 0x02
English (United States) "SafeNet Inc."
iProduct: 0x01
English (United States) "Sentinel Dual Hardware Key"
iSerialNumber: 0x00
bNumConfigurations: 0x01

===>Configuration Descriptor<===
bLength: 0x09
bDescriptorType: 0x02
wTotalLength: 0x0020 -> Validated
bNumInterfaces: 0x01
bConfigurationValue: 0x01
iConfiguration: 0x00
bmAttributes: 0x80 -> Bus Powered
MaxPower: 0x1E = 60 mA

===>Interface Descriptor<===
bLength: 0x09
bDescriptorType: 0x04
bInterfaceNumber: 0x00
bAlternateSetting: 0x00
bNumEndpoints: 0x02
bInterfaceClass: 0xFF -> Vendor Specific Device
bInterfaceSubClass: 0x00
*!*CAUTION: This appears to be an invalid bInterfaceSubClass
bInterfaceProtocol: 0x00
iInterface: 0x00
*!*ERROR: 0xFF is the prerelease USB Video Class ID

===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x01 -> Direction: OUT - EndpointID: 1
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0040 = 0x40 bytes
bInterval: 0x00

===>Endpoint Descriptor<===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x81 -> Direction: IN - EndpointID: 1
bmAttributes: 0x02 -> Bulk Transfer Type
wMaxPacketSize: 0x0040 = 0x40 bytes
bInterval: 0x00

Hai i have a software which will not run without a safenet sentinel dongle attached to it. How to find the type of dongle and how to create a dum p of key?. Can anybody help me?