Hasp hl emulator for x64 windows 7

i have bin file dumped with hasp2010dumper..i want to convert it to .reg and .dat for multikey..tried all the dumpers to convert it to .reg and .dat file..but no sucess..cant emulate the program..

can u all help plss...

Dump with this tool 
 lostdongle.com/bin/HaspHLDumper1.01.rar

still its creating a .bin file...

Show the bin file here

dont get me wrong hasp..i cant post the .bin file which is open for the all the people..if u could help me to convert that .bin or .dng to .reg and .dat for multikey emulation for x64bit..it would be highly appreciated..

sent to PM i will try...

hi everybody
can you help me about the following problem
i have no problem while i was using 5572.dng extended of hasp HL 2007
i want to work with multikey or vusb in windows 7 and 8 x86 or 64 bit
how can i do this ?
best regards

1. get yor modadd by toro
2.use hasphl dumper to get reg,.dat
2.and use haspslover to get seeds
3.play reg(add)
4.install

upload 5572.dng

show your installer file too

your MODADD:X5572

your seeds:

Seed1=0x60EE, Seed2=0x876A, Seed3=0xF9E7

your MYLOCK.FST:
[You must be registered and logged in to see this link.]

download and copy MYLOCK.FST to root\win\system32\drivers\
Also MYLOCK.FST file and 5572.reg  be on the
add seed inti reg file use sample multikeyemu 18.2.24 (win32bit) and Apply 5572.reg

install  multikeyemu 18.2.24  and done

we need to win64bit
can you send me win64bit ? please

sory my OS 32bit .but you can
  note:Previous work that you've done+this:
1.Disable and turn off UAC2
2.use MultiKeyEmu x64 v. 0.18.0.3 (with x64 devcon.exe)
3. sign C:\Windows\System32\Drivers\multikey.sys on
     Driver Signature Enforcement Overrider 1.3b    

4.reboot


   

must i change file 5572.reg ?

The correct method for "WIN 64Bit"


3.use MultiKeyEmu x64 v. 0.18.0.3 (with x64 devcon.exe) extra to  "c:\multi key"
4.install MultiKeyEmu x64 v. 0.18.0.3
5.for sign "C:\Windows\System32\Drivers\multikey.sys" use :Driver Signature Enforcement Overrider 1.3b    
    note:if multikey.sys not singed test in safe mode "F8" 
6.Disable and turn off UAC2
7.download and installed Sentinel System Drivers (v7.6.1)
Good luck

dadafatih wrote:must i change file 5572.reg ?

 if using multikey18.0.3 ,no need change path else yes

use multikey 18.1.1 for 64bit, save as reg

Code:

REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Multikey\Dumps\00005572]
"HlkMemory"=hex:\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"Seed1"=dword:000060EE
"Seed2"=dword:0000876A
"Seed3"=dword:0000F9E7
"ID"=dword:00000000
"DongleType"=dword:00000002
"withMemory"=dword:00000000

linkingpark wrote:The correct method for "WIN 64Bit"
You'd better start from the beginning:
1.for dump use PVA v 3.3 (sprodmp.exe)you should get a *.dmp file
2.use dmp2mkey v 2.3 (dmp2mkey.exe) you should reg,dat......

@linkingpark are you ---, its hardlock why you dump with pva 3.3 sprodmp????
If you have clear knowledge show the stuff here, otherwise don't move to wrong direction.

Do not insult me.This time I ignored. Could last.The next person might not like my kind


Where in my post title was a hard-Lock?Only in the Windows 32bits.
I just like the way I said it in Windows 7 (but for SuperPRO dongle)

@linkingpark My initiation is not insult, if you know guide the users correctly, you don't know don't post it.

dear hasp ,

I have problem about driver signature of windows 7 and 8 x64 bit .

all have this problem, exclude M$

dear hasp ,
thank you very much .

How do I get a signed driver.