Hardlock E-Y-E - WinXP

by Firewalker Wed Jul 23, 2014 9:43 pm

Hi Everyone,

This is my first post and I've really enjoyed reading through the forums.
I've been able to dump and emulate using Multikey in XP and Win7-64bit.
I'm trying to emulate an older LPT Hardlock E-Y-E dongle.

Here's what I've done so far.

The emulation will be done in Win7 on a virtual machine - Windows XP Mode 32Bit

1. Loaded HASP HL 5.2 drivers
2. Used Toro to obtain the MODAD
3. Dumped the contents using HL-dump - Generating the *.dat and *.reg file
4. Installed the *.reg file
5. Opened multikey32\install.cmd - Drivers installed successfully.

All installs properly but certain functions are not working.

I've been researching and I believe I should have the *.dat through HL-solver for the seeds and then through my mylock_builder.
After which copy the *.reg and mylockfst.fst to the windows\system32 and windows\system32\drivers directory.
Then install hardlock.sys from the (HL_emul.rar).

Unfortunately I'm unable to locate the HL_emul.rar file anywhere.
All the links appear to be dead.

Can some please post a link to HL_emul.rar?

Am I missing something using MultiKey32?

Is there a better way of doing this?

Any help would get greatly appreciated.

Thanks,
Firewalker

by kjms Wed Jul 23, 2014 11:05 pm

post dump files links here.

by Firewalker Wed Jul 23, 2014 11:14 pm

Here you go! Very Happy

[You must be registered and logged in to see this link.]

by kjms Thu Jul 24, 2014 2:18 am

here you go Laughing

Code:: REGEDIT4 [HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\00001816] "HlkMemory"=hex:\ 54,68,65,20,48,61,72,64,6C,6F,63,6B,20,68,61,73,\ 20,39,36,20,62,79,74,65,73,20,6F,66,20,52,4F,4D,\ 2C,20,33,32,20,62,79,74,65,73,20,6F,66,20,52,41,\ 4D,2E,20,59,6F,75,20,63,61,6E,20,77,72,69,74,65,\ 20,74,6F,20,52,4F,4D,20,75,73,69,6E,67,20,43,50,\ 20,53,57,20,61,6E,64,20,42,4F,41,52,44,21,21,21,\ B9,0F,B9,0F,DD,07,1C,00,0A,00,17,00,01,00,CE,07,\ 20,61,72,65,61,20,3D,20,33,32,20,62,96,0D,A3,08 "ID"=dword:00000000 "DongleType"=dword:00000002 "withMemory"=dword:00000001 "Seed1"=dword:00007329 "Seed2"=dword:0000BE41 "Seed3"=dword:000049D8 or "Seed1"=dword:0000613B "Seed2"=dword:000028D7 "Seed3"=dword:000049D8

by Firewalker Thu Jul 24, 2014 9:32 pm

Thank you very much kjms.
It's greatly appreciated.

Just a quick question, Are there any tutorials I can read over?
I notice that there are significant differences between the original and updated reg file.

Thanks,
Firewalker

by BfoX Thu Jul 24, 2014 9:37 pm

show difference

by Firewalker Thu Jul 24, 2014 10:43 pm

Hi BfoX,

It works perfectly I'm trying to understand the differences.

Below you'll find that all the items in red were removed. Items in blue we added.

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\00001816]
"Type"=dword:00000001
"Memory"=dword:00000001
"ID"=dword:00000000
"DongleType"=dword:00000002
"WithMemory"=dword:00000001

"Seed1"=dword:0000613B
"Seed2"=dword:000028D7
"Seed3"=dword:000049D8

"ACL"=hex:3B,95,D9,9C,89,D6,A8,D3
"HCH"=hex:29,1E,55,68,6F,4B,69,34

"Data"=hex:\
54,68,65,20,48,61,72,64,6C,6F,63,6B,20,68,61,73,\
20,39,36,20,62,79,74,65,73,20,6F,66,20,52,4F,4D,\
2C,20,33,32,20,62,79,74,65,73,20,6F,66,20,52,41,\
4D,2E,20,59,6F,75,20,63,61,6E,20,77,72,69,74,65,\
20,74,6F,20,52,4F,4D,20,75,73,69,6E,67,20,43,50,\
20,53,57,20,61,6E,64,20,42,4F,41,52,44,21,21,21,\
B9,0F,B9,0F,DD,07,1C,00,0A,00,17,00,01,00,CE,07,\
20,61,72,65,61,20,3D,20,33,32,20,62,96,0D,A3,08

"HlkMemory"=hex:\
54,68,65,20,48,61,72,64,6C,6F,63,6B,20,68,61,73,\
20,39,36,20,62,79,74,65,73,20,6F,66,20,52,4F,4D,\
2C,20,33,32,20,62,79,74,65,73,20,6F,66,20,52,41,\
4D,2E,20,59,6F,75,20,63,61,6E,20,77,72,69,74,65,\
20,74,6F,20,52,4F,4D,20,75,73,69,6E,67,20,43,50,\
20,53,57,20,61,6E,64,20,42,4F,41,52,44,21,21,21,\
B9,0F,B9,0F,DD,07,1C,00,0A,00,17,00,01,00,CE,07,\
20,61,72,65,61,20,3D,20,33,32,20,62,96,0D,A3,08

"Code"=hex:\
BE,41,14,EB,82,7D,7D,82,82,7D,7D,82,7D,82,14,EB,\
14,EB,82,7D,28,D7,14,EB,14,EB,28,D7,14,EB,41,BE,\
BE,41,41,BE,28,D7,BE,41,28,D7,7D,82,BE,41,41,BE,\
14,EB,28,D7,82,7D,28,D7,41,BE,28,D7,28,D7,14,EB,\
BE,41,41,BE,28,D7,7D,82,28,D7,BE,41,BE,41,41,BE,\
28,D7,14,EB,41,BE,28,D7,82,7D,28,D7,14,EB,28,D7,\
41,BE,BE,41,7D,82,28,D7,BE,41,28,D7,41,BE,BE,41,\
14,EB,28,D7,28,D7,41,BE,28,D7,82,7D,28,D7,14,EB,\
It goes on for many more lines.

by BfoX Fri Jul 25, 2014 12:41 pm

in blue is solved dump. in red - source data for solver. Data == hklMemory, acl/hcl is anti-collision data.

by usamael2000 Tue Aug 26, 2014 5:29 pm

Hi there,

I think I have the same dongle type. I will appreciate if someone help me to get it work in both 32 and 64 systems. Also please let me know which Multikey version I should use for 32 and 64 systems.

Here you are the dat and reg files for my dongle:

Dat file: 1drv(dot)ms/XQjVFl
Reg file: 1drv(dot)ms/XQk0J7

Thanks,

by Firewalker Tue Aug 26, 2014 10:54 pm

Hi,

I'm using Multikey v18.1 32bit and 64bit.
Depending on your OS XP 32bit and Win7 64bit.

Please give this a try.

REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Emulator\Hardlock\Dumps\70D5]
"HlkMemory"=hex:\
A8,FF,25,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
48,41,52,44,4C,4F,43,4B,20,45,2D,59,2D,45,20,77,\
69,74,68,20,4D,65,6D,6F,72,79,2E,00,00,00,00,00
"ID"=dword:00000000
"DongleType"=dword:00000002
"withMemory"=dword:00000001
"Seed1"=dword:00009EA2
"Seed2"=dword:000038C7
"Seed3"=dword:000081B3
or
"Seed1"=dword:0000A29E
"Seed2"=dword:0000C738
"Seed3"=dword:000081B3

by nodongle.biz Tue Aug 26, 2014 11:46 pm

It is correct seeds:
"Seed1"=dword:0000A29E
"Seed2"=dword:0000C738
"Seed3"=dword:000081B3

by Firewalker Wed Aug 27, 2014 12:06 am

I could be either, you'll have to try both sets.

by nodongle.biz Wed Aug 27, 2014 12:20 am

The first seeds set is incorrect.

by Firewalker Wed Aug 27, 2014 8:27 am

Besides actually trying it, how can you determine which set of seeds are correct?

by nodongle.biz Wed Aug 27, 2014 8:28 am

Check it using anti-collision data.

by usamael2000 Wed Aug 27, 2014 9:45 am

First of all, thank you so much for both Firewalker and nodongle.biz

the MK 18.0.3 was already installed on my computers (the 32 and 64), so I tried the reg with it.

The 1st seeds set did not work.

Only the 2nd seeds set worked fine.

I just changed the :

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Emulator\Hardlock\Dumps\70D5

TO

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Multikey\Dumps\000070D5

and everything is fine now on both windows 7 (32) and windows 8.1 (64).

I also finally was able to use the HL-Solver to obtain the seeds from the dat file.

Thanks again

by BfoX Wed Aug 27, 2014 9:48 am

sure, all info on the public. simply dont lazzy...

by hanro Tue Sep 23, 2014 3:43 pm

Dear All,

I am new and would also like help.

Dump can be found at

7840.zip
[You must be registered and logged in to see this link.]

Please help me also

Regards

by hasp Tue Sep 23, 2014 9:36 pm

7840:

by hanro Wed Sep 24, 2014 8:12 am

hasp wrote:
7840:

Dear hasp,

Thank you for your reply. I will try it in a while and post the results.

just one question. ID is 00000000 or do I need to put the ID which I have for my dump.

Regards

by Firewalker Sat Oct 04, 2014 3:35 pm

Hi hanro,

What kind of dongle are you trying to emulate?
What software did you use to make the dat file?

Firewalker

by hanro Sun Oct 05, 2014 1:05 am

Firewalker wrote:Hi hanro,

What kind of dongle are you trying to emulate?
What software did you use to make the dat file?

Firewalker

Dear all,

Thanks for all the help. I just played with the reg file a bit and could emulate the same.

Thank you very much for all your support and help. In the process of struggling with this I learned a lot. It would have not been possible without this forum and help of all the members.

Exetools team had done a great job and made a platform for helping not only newbies like me learn, but also for experts who can tackle new challenges and enhance their skills still further.

Regards

by raflab Fri Jan 29, 2016 4:48 am

Hi guys

I generated the .reg and .dat files from the dongle, but i need HL solver utility in order to get the seeds and modify the .reg file as mentioned above.

Anyone can help me with a download link ? your help is really appreciated

with regards

by BfoX Fri Jan 29, 2016 9:40 am

show your stuff

by gihan1707 Tue Feb 28, 2017 6:47 am

Dear sir,
I am newest and tries emulate a HASP (Aladdin Hardlock fast eye dongle)and using "Toro Aladdin Dongles Monitor" to find the PW1 and PW2 Plug usb dongle into machine and run the "Toro Aladdin Dongles Monitor" error 2. My machine x64 Oracle VM Virtual run on Win10.How can we do?

by Sponsored content

Hardlock E-Y-E - WinXP

Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP

Re: Hardlock E-Y-E - WinXP