emulate SuperPRO dongle in 64 bit Windows using MultiKey
+46
321123
Jordytaji
BfoX
califor
ahmed6810
andyjohnson79
leonas666
ovis25
kielbasa
earl42
Shattered
RitchieM
mohamedabdu23
paulofutre10
Mark Sanders
thandong007
dzionizz
meizuba
woohoou
kmz
hgw
ervgeol
hencooo
kjms
deams
udithas
anjoha
wetzell
Lomex
Fox34
dae3568
und4gr0und
csk01
maximusv
inyero
kujmss
donglet
wishgranter
william22
AndromAK
stephen67
nodongle
hasp
carlosrishmawi
hbb
fox_coder
50 posters
Page 5 of 6
Page 5 of 6 • 1, 2, 3, 4, 5, 6
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
Apparently its simply the latest SDK, nothing more. So it was more a case of if someone else had seen the same issue with a recently updated product that uses SuperPro. I don't want to have to get my dongle out of storage and have to plug it in again!
RitchieM- Posts : 3
Points : 3
Reputation : 0
Join date : 2014-04-09
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
Should have added, on MK 18.0.3
RitchieM- Posts : 3
Points : 3
Reputation : 0
Join date : 2014-04-09
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
All the links appear do be death and I can't find a reup in this topic? Can anybody upload to needed tools again please? They are hard to find.
thank you.
thank you.
Shattered- Posts : 2
Points : 4
Reputation : 0
Join date : 2012-04-01
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
[You must be registered and logged in to see this link.]
ovis25- Posts : 648
Points : 1234
Reputation : 332
Join date : 2014-06-07
Johnvb likes this post
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
Hola mis amigo como editar un archivo vusbbus.sys ayuda gracias de antemano..
Jordytaji- Posts : 50
Points : 102
Reputation : 4
Join date : 2014-09-16
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
Well, All I get from multikey is "no device removed devcon failed." Any suggestions?
earl42- Posts : 1
Points : 1
Reputation : 0
Join date : 2014-11-07
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
Hello,
I'm new in these dongle emulating solutions. I have emulated SafeNet HASP dongle with multikey 18.1.0 version on Win 7 x64. It works fine.
Now I'm trying to emulate SafeNet SuperPRO dongle and having issues with it. Looks like I have followed all instructions found in this topic, but software still does not recognise virtual dongle... In device manager appear new device, with no errors under usb controllers.
I have used PVA 3.3 to dump dongle, got *.dmp file.
Solved it with dmp2mkey 2.5.9.1.
I have tried to emulate obtained file with Multikey 18.0.3, 18.1.0 versions on Win 7x64. And with Multikey 18.0.3, 18.1.0, 19.1.8, 20 versions on WinXP x32.
Have tried to change cell57 to 3.
I'm using Sentinel drivers 7.5.8.
could it be conversation problem?
can somebody take a look, I would be very thankful.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\00007132]
"DongleType"=dword:00000003
"Copyright"="None"
"Created"="Thu Dec 04 18:55:00.625 2014 by dmp2mkey v2.5.9.1"
"Name"="7132 Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
03,03,03,03,01,01,00,01,\
03,03,00,00,00,00,00,00,\
00,02,01,01,00,00,00,00,\
01,01,01,01,01,01,00,01,\
00,00,00,00,00,00,00,00,\
01,01,01,01,01,01,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
7E,BA,32,71,00,00,00,00,00,00,00,00,1B,C0,00,00,\
A6,9F,09,C3,EF,8A,CC,F0,00,09,00,00,00,00,FD,D8,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
95,78,00,10,02,00,1F,00,69,52,C4,5D,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,04,A0,0F,1A,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
dmp file - https://jumpshare.com/b/yfUHDhqugtvyFcBJf8gs
I'm new in these dongle emulating solutions. I have emulated SafeNet HASP dongle with multikey 18.1.0 version on Win 7 x64. It works fine.
Now I'm trying to emulate SafeNet SuperPRO dongle and having issues with it. Looks like I have followed all instructions found in this topic, but software still does not recognise virtual dongle... In device manager appear new device, with no errors under usb controllers.
I have used PVA 3.3 to dump dongle, got *.dmp file.
Solved it with dmp2mkey 2.5.9.1.
I have tried to emulate obtained file with Multikey 18.0.3, 18.1.0 versions on Win 7x64. And with Multikey 18.0.3, 18.1.0, 19.1.8, 20 versions on WinXP x32.
Have tried to change cell57 to 3.
I'm using Sentinel drivers 7.5.8.
could it be conversation problem?
can somebody take a look, I would be very thankful.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\00007132]
"DongleType"=dword:00000003
"Copyright"="None"
"Created"="Thu Dec 04 18:55:00.625 2014 by dmp2mkey v2.5.9.1"
"Name"="7132 Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
03,03,03,03,01,01,00,01,\
03,03,00,00,00,00,00,00,\
00,02,01,01,00,00,00,00,\
01,01,01,01,01,01,00,01,\
00,00,00,00,00,00,00,00,\
01,01,01,01,01,01,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
7E,BA,32,71,00,00,00,00,00,00,00,00,1B,C0,00,00,\
A6,9F,09,C3,EF,8A,CC,F0,00,09,00,00,00,00,FD,D8,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
95,78,00,10,02,00,1F,00,69,52,C4,5D,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,04,A0,0F,1A,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
dmp file - https://jumpshare.com/b/yfUHDhqugtvyFcBJf8gs
leonas666- Posts : 8
Points : 9
Reputation : 1
Join date : 2014-11-01
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
capture the log with toro sentinel monitor post the log files
kjms- Posts : 194
Points : 201
Reputation : -4
Join date : 2010-09-12
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
I have tried to run sentinel monitor on Win 7 x64, but it dont start, error appear. So I have installed software on winxp, but I think, something is wrong with this monitor/driver/version or something else.. Anyway, there is log from toro sentinel monitor 2.01:
h**ps://jumpshare.com/v/UCAaFodNYWab8qcqsZqC
I have monitored dongle with usbTrace tool, maybe this could be helpful:
h**ps://jumpshare.com/v/GecPPUUqwmWd7h7aM5Px
I have tried to dump and solve with ssp2mk1.2, it shows "Failed to solve cell 10h (16)"
h**ps://jumpshare.com/v/c8zimg00idMygiu3B0wC
h**ps://jumpshare.com/v/UCAaFodNYWab8qcqsZqC
I have monitored dongle with usbTrace tool, maybe this could be helpful:
h**ps://jumpshare.com/v/GecPPUUqwmWd7h7aM5Px
I have tried to dump and solve with ssp2mk1.2, it shows "Failed to solve cell 10h (16)"
h**ps://jumpshare.com/v/c8zimg00idMygiu3B0wC
leonas666- Posts : 8
Points : 9
Reputation : 1
Join date : 2014-11-01
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
Could You provide some links where I could download pva, multikey from ?
The ones given in the first post are already inactive.
thanks
p.s. maybe You could help me out.
I'm trying to create a virtual usb dongle to get one printing program to work, however when I click install.cmd it says 'devcon failed'.
what's strange, on my computer it doesn't work, but on my sisters' it does. same windows on both (win 7 x64). any clue?
I just realized that it works under safe mode.
any ideas??
The ones given in the first post are already inactive.
thanks
p.s. maybe You could help me out.
I'm trying to create a virtual usb dongle to get one printing program to work, however when I click install.cmd it says 'devcon failed'.
what's strange, on my computer it doesn't work, but on my sisters' it does. same windows on both (win 7 x64). any clue?
I just realized that it works under safe mode.
any ideas??
kielbasa- Posts : 4
Points : 6
Reputation : 0
Join date : 2015-01-12
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
Hello,
could somebody share link for toro sentinel monitor? newer version than 2.01. I think, this version doesn't work properly with my dongle (I can't get query/response pairs).
could somebody share link for toro sentinel monitor? newer version than 2.01. I think, this version doesn't work properly with my dongle (I can't get query/response pairs).
leonas666- Posts : 8
Points : 9
Reputation : 1
Join date : 2014-11-01
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
None exist.
Private solution for AES tunneling.
Private solution for AES tunneling.
ovis25- Posts : 648
Points : 1234
Reputation : 332
Join date : 2014-06-07
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
I'm using Sentinel System Driver 7.5.8, because software doesn't work with older drivers. Could be there problem, why Toro Sentinel Monitor doesn't show query/response pairs? Because in "About" tab, it says "support up to sentinel driver v7.3.2"...
leonas666- Posts : 8
Points : 9
Reputation : 1
Join date : 2014-11-01
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
Could somebody help me with this case?
leonas666- Posts : 8
Points : 9
Reputation : 1
Join date : 2014-11-01
BfoX- Posts : 1218
Points : 1662
Reputation : 307
Join date : 2012-04-18
Location : Earth
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
I have started software 3 times and recorded USB traffic with USBTrace 2.7.
h**ps://jumpshare.com/v/z8CJOFDMo3oOAUT7AkmW
Now I'm recording traffic, every 1 minute there is activity. I'll paste it later
h**ps://jumpshare.com/v/z8CJOFDMo3oOAUT7AkmW
Now I'm recording traffic, every 1 minute there is activity. I'll paste it later
Last edited by leonas666 on Tue Mar 24, 2015 1:49 am; edited 1 time in total
leonas666- Posts : 8
Points : 9
Reputation : 1
Join date : 2014-11-01
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
log, while working with software. there is activity between software and dongle every 1 minute:
h**ps://jumpshare.com/v/wH4OkDwNAvrLbKhQrnID
h**ps://jumpshare.com/v/wH4OkDwNAvrLbKhQrnID
leonas666- Posts : 8
Points : 9
Reputation : 1
Join date : 2014-11-01
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
only part of log can be decoded. other part work over the AES tunneling
BfoX- Posts : 1218
Points : 1662
Reputation : 307
Join date : 2012-04-18
Location : Earth
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
is that means, there is no way to emulate this dongle?
leonas666- Posts : 8
Points : 9
Reputation : 1
Join date : 2014-11-01
ovis25- Posts : 648
Points : 1234
Reputation : 332
Join date : 2014-06-07
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
Hi
Hoping someone can help. Need to get emulator for SuperPRO running on 64 bit Windows xp, 7, 8, whatever really!
Got it running without issue on 32 bit but all of the information im finding about 64 bit is a few years old and a lot of dead links.
If anyone could help me out with what I actually need to get this working that would be much appreciated.
Thanks
Hoping someone can help. Need to get emulator for SuperPRO running on 64 bit Windows xp, 7, 8, whatever really!
Got it running without issue on 32 bit but all of the information im finding about 64 bit is a few years old and a lot of dead links.
If anyone could help me out with what I actually need to get this working that would be much appreciated.
Thanks
andyjohnson79- Posts : 1
Points : 1
Reputation : 0
Join date : 2015-04-24
BfoX- Posts : 1218
Points : 1662
Reputation : 307
Join date : 2012-04-18
Location : Earth
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
hello guys i used to install vusbus dongle emulator at win xp & win7 too but now i cant install it in win-8 x64
although i follow all the steps i found online as Run Driver Signature Enforcement Override Tool
despicable test mode
the virtual USB multi key is been installed in system device but cant be installed in universal serial bus control in the device manger
any help please i need this software energetically
DON'T LAZZY!!!
[You must be registered and logged in to see this link.]
although i follow all the steps i found online as Run Driver Signature Enforcement Override Tool
despicable test mode
the virtual USB multi key is been installed in system device but cant be installed in universal serial bus control in the device manger
any help please i need this software energetically
DON'T LAZZY!!!
[You must be registered and logged in to see this link.]
ahmed6810- Posts : 1
Points : 1
Reputation : 0
Join date : 2015-06-21
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
ahmed6810 wrote:hello guys i used to install vusbus dongle emulator at win xp & win7 too but now i cant install it in win-8 x64
although i follow all the steps i found online as Run Driver Signature Enforcement Override Tool
despicable test mode
the virtual USB multi key is been installed in system device but cant be installed in universal serial bus control in the device manger
any help please i need this software energetically
DON'T LAZZY!!!
[You must be registered and logged in to see this link.]
1. Ensure that you have installed on Windows 8 / 8.1 (GPEDIT.MSC) for this press Win + R write: gpedit.msc and ENTER .... if nothing comes up ... you need to upgrade to PRO version .. . to do this: Right click on My Computer ... properties ... add new features to Windows ... search on google a serial number to update (after this you can find a patch to activate your windows)
2. Restart in advanced mode ... press numero 7 ... option:
Disable the mandatory use of drivers signed.
After that you follow the steps of the video that I leave here: (YouTube)
watch?v=qSzgo0YMjRw
Be happy;)
Califor
califor- Posts : 59
Points : 71
Reputation : -103
Join date : 2015-05-11
Age : 38
Re: emulate SuperPRO dongle in 64 bit Windows using MultiKey
Friends someone can help me
and generate the LTP reg Superpro
but software
principal does not work
and the others if I can help thanks..
[You must be registered and logged in to see this link.]
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\00001741]
"DongleType"=dword:00000003
"Copyright"="None"
"Created"="Thu Mar 31 09:30:11.826 2016 by dmp2mkey v2.5.9.1"
"Name"="1741 Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
98,1E,41,17,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
29,00,01,DA,B4,47,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,01,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
and generate the LTP reg Superpro
but software
principal does not work
and the others if I can help thanks..
[You must be registered and logged in to see this link.]
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\00001741]
"DongleType"=dword:00000003
"Copyright"="None"
"Created"="Thu Mar 31 09:30:11.826 2016 by dmp2mkey v2.5.9.1"
"Name"="1741 Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
98,1E,41,17,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
29,00,01,DA,B4,47,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,01,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
Jordytaji- Posts : 50
Points : 102
Reputation : 4
Join date : 2014-09-16
Page 5 of 6 • 1, 2, 3, 4, 5, 6
Similar topics
» Problem to emulate dongle sentinel superpro
» HASP HL DONGLE EMULATE WİTH MULTIKEY
» [SafeNet USB SuperPro/UltraPro/HardwareKey] Can i emulate this dongle?
» how to clone Sentinel SuperPro dongle to New Sentinel SuperPro dongle
» Superpro Emulation on Windows 8.1
» HASP HL DONGLE EMULATE WİTH MULTIKEY
» [SafeNet USB SuperPro/UltraPro/HardwareKey] Can i emulate this dongle?
» how to clone Sentinel SuperPro dongle to New Sentinel SuperPro dongle
» Superpro Emulation on Windows 8.1
Page 5 of 6
Permissions in this forum:
You cannot reply to topics in this forum
|
|