Sentinel vUSB Emulator How To

Hi All,
I decided to write this little how-to after spending a lot of time trying to emulate my sentinel dongle. All the programs I used were not written by me and I am very grateful to all great guys here.
I emulated "Sentinel SuperPro"
1. Dump dongle with PVA 3.3 util with out "Brute WP" selected.
2. Solve the DMP file using "f1_nodongle" (10x to cEnginEEr) util, you should get XXXX.SSP file (~100kb).
3. Use "UniDumpToReg" util to convert the SSP to REG. Inside "UniDumpToReg" select your SSP file and then select "SafeKey ssp -> vUSB Sentinel" option and push "GO".
4. Open the REG file in Notepad or any other text editor and make the following changes:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\Emulator\Sentinel\Dump\XXXX0000]

To

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\ru-board\mulators\Dump\XXXX0000]

"sntMemory"=hex:0A3E,1255,C5E3,0000,0009…..
To
"sntMemory"=hex:3E,0A,55,12,E3,C5,00,00,09,00… .. make this comma add and switch up to the end of this cell
5. Run "install.bat" from "vusbus" folder
6. Your comp should found new hardware and install it by it self
7. Import your changed REG in to the REGISTRY
8. Reboot
Here is link to all utils that I mentioned above:
Sentinel_vUSB_Emulator.zip

New converter from ssp to reg ver 1.11:
SSP2reg1.11.rar
pass:reteam.org

Can you upload tools again?
Thanks

Not sure If I was doing this right, but when I did the dump I got 4 .dmp files. The file sizes and names (all similar name with differnt endings, spro_RBBO_SPN_DRIVER_xxxx.dmp) are as follows:
3796_0.dmp = 29kb
adeb_0.dmp = 1kb
e095_0.dmp = 45kb
ebad_0.dmp = 1kb

I highlighted them all and dragged them into the f1_nodongle.exe and the output file was titled 3976.ssp and was 99kb.

Also I wasn't sure, but in the UniDumpToReg, should there be a username? when I open the program my windows username is shown there.

Please help. Thanks.

dear x3digital upload your dump file i will help you.....

[You must be registered and logged in to see this link.]I've been using this method for WinXP and it's worked great.

Now that I had to upgrade to Windows 7 64 bit, this method does not work. I get "devcon failed" error when it tries to install vusbbus.inf.

Does anyone know how to work around this?

Thanks,

Jeff



UPDATE:
Nevermind, I found the fix:
reteam.org/board/showpost.php?p=23212&postcount=2

I got stuck @ 1st step itself

when i click generate dmp file in PVA 3.3 (Without Brute Froce) i get reply as unable to establish connection to server.
iam using Safenet Sentinel dongle for Edius 5.5
What shall i do.
pls help me. Iam newbie

Edius5.5 software is using hasp dongle, dump with this [url=http://lostdongle.com/bin/HaspHLDumper1.01.rar]tool[/url] hasp password is 6CFF 6C7E
updated version is Edius6.7

@Hasp
Thank you very much 4 uor response . ill try it and reply you

@ Hasp

Its not working

They provided me two dongles with this software
1.Safenet Sentinel
[You must be registered and logged in to see this image.]

2.Rockey 4nd
[You must be registered and logged in to see this image.]

this software works when both dongles are connected... else returns error "Insert Dongle"

Pls Help.

i am sure Edius5.5 using hasp dongle only, may be this dongle useing other software .
log with toro sentinel monitor get password ,dump with git safedump

Sorry Hasp

Ya its not edius . its plugin for edius called Spark FX
Thanks for Guiding me. let me try it and reply U.

FORGET it. NO one here have dongle Emulators for those dongles you mentioned. YOU need to pay for an Emulator. Already failed myself trying to make an EMU for Vistitle, which uses also a SHK Dongle.

hasp

I got two dmp files with PVA 3.3

wAT TO DO NEXT

I dumped with f1_nodongle . it showed me "file e095.ssp is created . press any key...."

But no o/p files are created

I got 2 .dmp files from PVA 3.3

spro_RNBO_SPN_DRIVER_3976_0.dmp (25kb)

spro_RNBO_SPN_DRIVER_e095_0.dmp (49kb)



PLs Help ....

Thnaks

upload your both dump file on mediafire host

Here is link for dmp file

www(dot)mediafire.com/?4cw3mzvai875va8

use multikey
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\00003976]
"DongleType"=dword:00000003
"Copyright"="None"
"Created"="Thu Apr 19 14:20:43.250 2012 by dmp2mkey v2.5.9.1"
"Name"="3976 Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
03,03,00,01,03,03,03,03,\
01,01,00,01,03,03,03,03,\
01,01,00,01,03,03,03,03,\
01,01,01,01,01,01,01,01,\
00,00,00,00,00,00,00,00,\
01,02,02,02,01,00,00,00,\
01,01,00,00,02,01,00,01
"sntMemory"=hex:\
98,00,76,39,00,00,00,00,00,00,00,00,3F,91,00,00,\
F3,10,3A,D7,FF,FF,13,00,C2,64,AD,D1,00,00,00,00,\
00,00,00,00,79,3F,01,00,8D,11,82,E5,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
03,00,B5,FF,D4,FF,1E,FF,11,06,CD,FF,33,BC,00,00,\
0A,0A,0A,0A,00,00,00,00,AB,FF,0B,0A,00,00,00,00

other key
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\0000E095]
"DongleType"=dword:00000003
"Copyright"="None"
"Created"="Thu Apr 19 14:21:33.734 2012 by dmp2mkey v2.5.9.1"
"Name"="E095 Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
03,03,01,01,03,03,03,03,\
00,00,00,00,01,01,00,00,\
00,00,00,01,03,03,03,03,\
03,03,02,00,00,00,00,00,\
01,00,03,03,03,03,03,03,\
01,01,00,00,03,03,03,03,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
96,01,95,E0,00,00,00,00,0E,F1,00,00,34,0C,00,00,\
34,12,EF,CD,D4,1A,FF,FF,DC,FE,67,C5,00,00,00,00,\
00,00,00,00,00,00,00,00,3A,86,0A,06,00,00,30,73,\
0F,00,01,00,00,00,14,00,9F,4A,45,F2,00,00,00,00,\
B4,10,85,88,09,00,00,00,00,00,00,00,00,00,00,00,\
28,00,00,00,A5,26,D6,C7,7D,3A,BA,CC,00,00,00,00,\
07,00,06,00,00,00,00,00,0A,79,14,CC,FE,4C,8B,CA,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00

in this key Cell 0x2c needs tunnel data

hasp wrote:dear x3digital upload your dump file i will help you.....

can anyone zip/send me a copy of ssp2reg1.11? Cant find it anywhere. thx L.

I take it the millennium nazis have stomped this site.... because I'm hearing crickets.

please someone send me the tools needed to emulate my sentinel and HASP dongles.please..thank you so much

fox_coder wrote:Hi All,
I decided to write this little how-to after spending a lot of time trying to emulate my sentinel dongle. All the programs I used were not written by me and I am very grateful to all great guys here.
I emulated "Sentinel SuperPro"
1. Dump dongle with PVA 3.3 util with out "Brute WP" selected.
2. Solve the DMP file using "f1_nodongle" (10x to cEnginEEr) util, you should get XXXX.SSP file (~100kb).
3. Use "UniDumpToReg" util to convert the SSP to REG. Inside "UniDumpToReg" select your SSP file and then select "SafeKey ssp -> vUSB Sentinel" option and push "GO".
4. Open the REG file in Notepad or any other text editor and make the following changes:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\Emulator\Sentinel\Dump\XXXX0000]

To

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\ru-board\mulators\Dump\XXXX0000]

"sntMemory"=hex:0A3E,1255,C5E3,0000,0009…..
To
"sntMemory"=hex:3E,0A,55,12,E3,C5,00,00,09,00… .. make this comma add and switch up to the end of this cell
5. Run "install.bat" from "vusbus" folder
6. Your comp should found new hardware and install it by it self
7. Import your changed REG in to the REGISTRY
8. Reboot
Here is link to all utils that I mentioned above:
Sentinel_vUSB_Emulator.zip

New converter from ssp to reg ver 1.11:
SSP2reg1.11.rar
pass:reteam.org

please send me the tools required to make this emulation come into life. I really need it. I would appreciate if you could help me. Thanks