Hasphl2010 Running Problems
+2
ovis25
jmsrc92
6 posters
Page 1 of 2
Page 1 of 2 • 1, 2 
Hasphl2010 Running Problems
by jmsrc92 Wed Jul 23, 2014 3:45 am
Hi i only have DNG available. SENTEMUL2007 just gives me blue screen of death when trying to use that to recover a dmp file to change it to reg.
But my real problem is that when i use a PC (Tried XP 32bit and 7 64Bit) the emulator works fine no problems at all.
When i use a laptop tried windows 8 64bit and Windows 7 64bit it does not work it says it cannot be found.
However i know its not the emulator as when i load an outdated dng the software picks that up and says it is out of date.
So it works on 3 PC's i have tested and on none of the 2 laptops i have tested so i thought if i can convert to reg it would work.
What do you guys think?
But my real problem is that when i use a PC (Tried XP 32bit and 7 64Bit) the emulator works fine no problems at all.
When i use a laptop tried windows 8 64bit and Windows 7 64bit it does not work it says it cannot be found.
However i know its not the emulator as when i load an outdated dng the software picks that up and says it is out of date.
So it works on 3 PC's i have tested and on none of the 2 laptops i have tested so i thought if i can convert to reg it would work.
What do you guys think?
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by ovis25 Wed Jul 23, 2014 5:50 am
Yes, share here maybe it can be converted.
ovis25- Posts : 648
Points : 1234
Reputation : 332
Join date : 2014-06-07
Re: Hasphl2010 Running Problems
by jmsrc92 Wed Jul 23, 2014 6:54 am
www(dot)dropbox(DOT)com/s/ln5gr698myhd38w/49A52D1D_full.dng
PASS = 49A5 2D1D
PASS = 49A5 2D1D
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by kjms Wed Jul 23, 2014 7:07 am
SENTEMUL2007 is sentinel dongle your dng is hasp?
kjms- Posts : 194
Points : 201
Reputation : -4
Join date : 2010-09-12
Re: Hasphl2010 Running Problems
by jmsrc92 Wed Jul 23, 2014 7:20 am
I believe it's a hasp I have I have tried HASP dl it punched out 118byte bin file tried opening with edge no luck if someone could tell me what tools to use that would be great as I said I only had the dng file though thanks is it possible to make dumps running hasphl2010?
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by ovis25 Wed Jul 23, 2014 8:14 am
Do u have original dongle?
Maybe I can help u dump and emulate.
If u can share here information.
Maybe I can help u dump and emulate.
If u can share here information.
ovis25- Posts : 648
Points : 1234
Reputation : 332
Join date : 2014-06-07
Re: Hasphl2010 Running Problems
by jmsrc92 Wed Jul 23, 2014 8:29 am
I don't have the original dongle anymore. I am curious to why it isn't working on a laptop but works on PC's though. If you can't convert the DNG then that's fine is their any software to convert this? If I run it in a emulator and dump using HASP2010 do you think that would work and then convert?
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by BfoX Wed Jul 23, 2014 9:39 am
dump it with any free dumper exclude HASP20xx and show this dump-may be any1 can help you.
BfoX- Posts : 1218
Points : 1662
Reputation : 307
Join date : 2012-04-18
Location : Earth
Re: Hasphl2010 Running Problems
by jmsrc92 Wed Jul 23, 2014 9:48 am
That's also a problem I can't get any dumper to work if someone could tell me what one to use then I will do it no problem. I have tried various types I think most of them are sentinel and they do not work
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by jmsrc92 Wed Jul 23, 2014 10:21 am
I managed to create a dump with h5dmp.exe it said succesful and unidumptoreg was succesfull.
How do i now edit this to my registry??
How do i now edit this to my registry??
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
ovis25- Posts : 648
Points : 1234
Reputation : 332
Join date : 2014-06-07
Re: Hasphl2010 Running Problems
by jmsrc92 Wed Jul 23, 2014 11:19 am
www(dot)dropbox(dot)com/s/amc39t9phst90kx/hasp.rar
How do you edit them?
Also what do i need just multikey?
How do you edit them?
Also what do i need just multikey?
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by ovis25 Wed Jul 23, 2014 11:28 am
[You must be registered and logged in to see this link.]
Please use those to backup:
For H5dmp.cmd and GUI replace password 3C39 with 49A5 & 25A0 with 2D1D in Backup Hasp4/HL.
Post dump here to make emulator.
Please use those to backup:
For H5dmp.cmd and GUI replace password 3C39 with 49A5 & 25A0 with 2D1D in Backup Hasp4/HL.
Post dump here to make emulator.
ovis25- Posts : 648
Points : 1234
Reputation : 332
Join date : 2014-06-07
Re: Hasphl2010 Running Problems
by jmsrc92 Wed Jul 23, 2014 12:27 pm
Ok will see if I can. However I only got the dump from running the emulator. Is there a reason the DNG can't be converted? Also when I gave you this reg is it a bad one and should I of used a different tick box when using unitodmp?
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by hasp Wed Jul 23, 2014 12:44 pm
Use MK 18.1.2 32&64bit
- 49A52D1D:
- REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Multikey\Dumps\49A52D1D]
"Copyright"="hasp"
"Name"="To jmsrc92"
"DongleType"=Dword:00000001
"Created"="23/07/2014 23:03:28"
"SN"=dword:058E7F07
"Type"=dword:0000000A
"Memory"=dword:00000001
"SecTable"=hex:06,06,A2,A2,0C,0C,A8,A8
"NetMemory"=hex:FF,FF,FF,FF,FF,FF,00,00,FF,FF,FF,FF
"Option"=hex:00,01,02,4A,1F,01,17,06,0E,01,10,21,2D,00
"Data"=hex:\
00,00,29,39,FF,FF,FF,FF,FF,D1,D1,43,5C,20,2C,50,\
BB,79,BB,79,BB,79,D2,55,BB,79,BB,79,BB,79,BB,79,\
29,4C,17,1A,2A,F6,AE,82,7F,60,FC,CD,BB,79,E0,78,\
09,77,BB,79,E4,77,BB,79,BB,79,BB,79,BB,79,BB,79,\
FC,BD,E0,78,BB,79,BB,79,BB,79,BB,79,BB,79,BB,79,\
BB,79,BB,79,BB,79,BB,79,BB,79,95,0E,DD,03,2D,02,\
74,48,27,6E,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF
hasp- Posts : 454
Points : 634
Reputation : 172
Join date : 2011-12-16
Re: Hasphl2010 Running Problems
by jmsrc92 Wed Jul 23, 2014 1:17 pm
Any tutorial on how to run it or why it's not working on any laptops?
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by jmsrc92 Wed Jul 23, 2014 1:20 pm
In HASPHL2010 the dumper tab shows the passwords but it says dongle not found?? Yet on PC it works :s
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by jmsrc92 Wed Jul 23, 2014 1:45 pm
@ovis25 thanks for those tools havent came across them before
here is the file
www(dot)dropbox(dot)com/s/7vma8qz2yxoezwh/DUMP.rar
here is the file
www(dot)dropbox(dot)com/s/7vma8qz2yxoezwh/DUMP.rar
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by jmsrc92 Wed Jul 23, 2014 1:53 pm
however this is now currently on a 64bit windows and its on the laptop that wont run the software for whatever reason
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by ovis25 Wed Jul 23, 2014 2:17 pm
Need to read How to emulate for x64. You can find on this forum.
ovis25- Posts : 648
Points : 1234
Reputation : 332
Join date : 2014-06-07
Re: Hasphl2010 Running Problems
by jmsrc92 Wed Jul 23, 2014 5:06 pm
So does a dump from older OS not work on new x64 unless its used by MultiKey?
Also copied that code over to notepad and saved it as .reg is that what i am supposed to do a link to the tutorial would be good cant get a clear set of instructions thanks
Also copied that code over to notepad and saved it as .reg is that what i am supposed to do a link to the tutorial would be good cant get a clear set of instructions thanks
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by ovis25 Thu Jul 24, 2014 2:10 am
Dump should be converted to MK, for bit 64, that version should be digital signed and driver test mode enabled in x64.
Later I'll help u.
Later I'll help u.
ovis25- Posts : 648
Points : 1234
Reputation : 332
Join date : 2014-06-07
Re: Hasphl2010 Running Problems
by jmsrc92 Thu Jul 24, 2014 3:11 am
Ok thanks I saved it with notepad and installed Multikey and installed the reg file then restarted but no luck so far.
Still coming up not found
Still coming up not found
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by jmsrc92 Thu Jul 24, 2014 4:29 am
So tried it again on another 32bit XP OS (HASPHL2010) with dng that works on 3PC's and again it failed. Somthing is seriously wrong
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Re: Hasphl2010 Running Problems
by jmsrc92 Fri Jul 25, 2014 3:26 am
For some reason i have found the problem to be with computers not having a Printer Port for some reason as the dongle was a Parallel dongle is it possible to change the type of dongle and lie to th software?
If anyone has another dump it is PC-DMIS thanks
If anyone has another dump it is PC-DMIS thanks
jmsrc92- Posts : 20
Points : 24
Reputation : 0
Join date : 2014-07-22
Page 1 of 2 • 1, 2
Similar topics» From HASPHL2010 to multikey reg
» How to use files create for HL-Dump 2.1v in Multikey x64 with Windows 7 x64
» Running MultiKey With Driver Signature Enforcement Overrider
» Problems identifying a dongle
» Hasp HL Emulator Problems
» How to use files create for HL-Dump 2.1v in Multikey x64 with Windows 7 x64
» Running MultiKey With Driver Signature Enforcement Overrider
» Problems identifying a dongle
» Hasp HL Emulator Problems
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum|
|
|