Help for Dump File

before my prog is running on windows 10 - now i have updated windows 10 and my prog is not more running.
before i had multikey  installed.
now i have heart that i must install mkbus 18.2.7 for windows 10 update 64 bit

see my dumpfiles 
can anybody help me ?
Many thanks for answer

Sorry i can`t send the dumpfiles - there is a info, that i can send only max size per file 0Mb

use any upload and post here the plain link

[You must be registered and logged in to see this link.]

can you find it

Hi , i also just updated my windows 10, basically this update installed new system and move the original to
"system.old" folder.
Now my windows version is Build 15063.rs2.
I also found that the multikey fail to work.

Then I removed the device and then turned on the "Test Mode" and reboot the windows with "Driver Signature Enforcement" disabled.

Install the multikey again and shut down computer.

the multikey works again .(version 18.1.0 )


Test Mode ON -> Driver Signature Enforcement disabled ->Install the multikey->shut down the PC ->works~

was talked about this test mode ON in x64 OS 100x times already, sorry nobody had nerves to talk it over again.

use mkbus, change registry path in files and test mode on.

may be you use x32 devcon on x64 machine? it wrong

no i use devcon for x64 . have you a working devcon for windows 10  x64.
then i will test this
many thanks

To Holzcad

remember to 「Remove」 the original devcon first！
run the program in the multikey folder to remove it！

many thanks for all the helper`s. now is my prog running.
the problem was that my version from multikey was not for windows 10.
the running version multikey is from 03.06.2015.

many thanks