Help Emulating unknown dongle

Hi all
Im new to this forum and emulating dongles.
one of my softwares work with customized dongle and i really don't know which type is it(but i guess its some type of HID dongle).but it seems its not like traditional dongles.
i attached the dongle,start usbtrace capture and enter my pin code(which you can see it in dump file it is 'usr1') to enter my application and then stop the capture.
i will appreciate any help to emulate this dongle and also appreciate any tutorial in this area.
i uploaded usbtrace log file to be viewed by professionals here: mediafire.com/?94qi3yxjhgjhgj
thanks in advance

you make log on x64 OS?

convert it to .txt format

yes its x64bit OS
should i change my OS to 32bit?
you mean export from usbtrace to txt format?

load utl file to usb trace. click File->Export Utility->change file format to .txt ->Export

here you are, exported as text file: mediafire.com/?nbdwbx8358zqcj3

wrong log

Make log with USBTrace . Simple manual:

1) Download USBTrace

2) Setup and register USBTrace

3) Run USBTrace

4) Press button with label "Capture hot plugged USB devices"

5) Press button with green arrow

6) Insert dongle to USB

7) Press button with red square

Save log to file

9) In top left corner (in USBTrace) select your

USB device and check it

10) Press button with green arrow

11) Run your program and work with her

12) Press button with red square

13) Save log to file

sorry i didn't know the instruction as you said.
here you are: mediafire.com/?c67f8rl2hhuy88hkj
another point that is good to know, dongle install custom driver for the first time that it connected to the system.if you need it tell me to capture a log on a fresh pc.
thanks in advance

vid=0xF6B5, pid=0xBD60

imho, not any solutions for this type of dongle

thanks,
could you introduce some books or tutorial in this area to read?
how dongles from safenet,alladin,... which i think its hard to emulate can be emulated but this type of dongle cannot be?
thanks

why is not?

you need make research the dongle protocol (way between the dongle and target software). learn api communications, get the hasp vusbbased (source by Chingachguk & Denger2k) as sample. on finish you write own emulation driver as well.

have you ever work with vmulti?
could it be helpful in my project?